The mould base material is 1.2311.Available material is 1.1730 or 50C.
The mould cavity and core material is 1.2767 with hardness HRC58±2.Available material 1.2311,1.2738,1.2767 etc.
The mould life is 1,500,000shots.
The standard of mould is Hassco.Available with DME,Meusburger standard.
The material of guide and busher are bearing steel with hardness HRC60.The ejector pin material is SKD61 with hardness HRC60.
The mould is working on 200grams(130T) injection and circle time is 30seconds.
The injection gate is tunnel gate and work with automatic.The part drop with free and the injection gate cut with automatic.
The plastic component is is used for automotive operation panel.
The cooling medium is water and cooling nut is Hassco cooling nut.
The plastic component surface is EDM(VDI3400 33) and Available surface is hight gloss polish.
The hot runner system is available for the mould.The type hot runner can be point nozzle,needle nozzle,open nozzle.